Views: 31 Author: Site Editor Publish Time: 2021-08-31 Origin: Site
Now more and more people begin to understand and buy garbage processor. So what should be focused on when on purchase?
The idling speed of AC motor is relatively low (about 1800 rpm) and the number of revolutions of load operation (when there is food waste coming in) changes little, which can damage hard bones and other food waste and the noise is low. But compared with the DC motor, the power of AC motor is lower when food waste is dealt with.
The idling speed of DC motor is higher (about 4000 rpm) and the grinding efficiency is higher than that of AC motor. When it is working under load (when there is food waste coming in), the number of revolutions is about 2800 rpm. The speed and torque of DC motor are higher than that of AC motor when food waste is ground.
Grinding grade directly corresponds to grinding ability. Generally speaking, the higher the level of grinding is, the higher the precision of grinding will be. The better the effect of fiber and hard bone garbage treatment is, the higher the corresponding positioning and price will be.
The damage type is that the garbage is grinded and mixed with water to form a liquid state, which is directly flushed into the sewer. Most of them are for household usage.
The rejection drying type is to separate the waste water from the solid matter and drain away water from the water basin, leaving the solid matter compressed into a block, which is convenient for storage and treatment. Most of them are commercial.
Continuous operation type is also called C type, which is common on the market. It is equipped with an air switch. After the garbage is put into the waste food processor cavity, it can be broken by pressing the switch. It can work continuously. The garbage will be smashed and washed away with the tap on and there are many models available. But because the hand can reach in during operation, if there are children at home, there will still be certain risks.
Batch processing type is also called B type, which is convenient for batch disposal management of garbage. The wireless switch is easy to install and free of punching. As long as the switch is glued to the height beyond the reach of children, the above risks can be avoided. This one has a cover on the garbage entrance. Only when the cover is closed can the machine run. It is not afraid of children’s putting their hands in during the operating process.. There is no need to make a hole in the sink, safe and low noise. But it takes a long time and because of the need to close the lid and send the garbage in batches, the operation is also more troublesome.
Make sure that the diameter of the sink matches that of the sink food disposer. If not, then it is necessary to match with the reducer. In addition, the firmness of equipment installation should be observed.
Food waste processor is not omnipotent. For example, metal and glass cannot be put in.
For example, the 550W kitchen food waste processor, alloy cutterhead, stainless steel grinding chamber, wireless switch, metal water outlet, the price is about 1500 yuan. This is the most cost-effective.
But in fact, it is better to go to the store to experience it. Only in this way can people have an intuitive understanding of the functions, operation conditions and noise occurrence of kitchen garbage shredder products so that they can make the most appropriate choice finally.
Taizhou Value Biotechnology Co, Ltd. is a high-tech enterprise specializing in the production of waste disposal equipment integrating R&D, production and sales. Its products include trash processor, kitchen sink food macerator, etc., which are favored by customers and consumers for its advanced nature, practicality, safety, economy and novelty. Welcome to patronize.
